Cold weather can affect the behaviour of materials such as concrete. Understand the characteristics of what you’re dealing with and take regular…
LABC News
Blog Post
Where more than 50% of the surface of an existing roof is re-covered, a Building Regulations application must be made - and the Regs require the roof…
Blog Post
Building Regulations Approved Document C recommends using BS 8102 to design basements where walls and floors are subject to water pressure.
Three…
Blog Post
If you’re working on an extension and you find something like the above, you’ll need to put it right.
What’s the problem?
Using a ‘P’ trap at the…
Blog Post
The above photograph was taken by one of our building control surveyors carrying out a site inspection, and shows how attention to detail (or a lack…
Blog Post
Walls usually crack because of movement in buildings. Allowing for these subtle movements during construction can prevent problems later. If you don’…
Blog Post
The primary function of an in-building drainage system is to remove soil and waste. In doing so, you must take care to prevent foul air and water…
Blog Post
This junction can account for up to 26% of heat loss through thermal bridging, so it is critical the metal lintel is isolated from the external wall…
Blog Post
The tiles you choose for low pitch roofing on a single-storey domestic extension are important. Tile choice is limited when it comes to lower pitches…