How to get it right: Don’t create confusing messages with fire signage!
One of our surveyors recently sent this photo to us following an inspection at a factory.
Extensions and alterations had been carried out to the factory to create additional space as the company expanded.
Unfortunately, one alteration involved a previous emergency exit being enclosed to create a store room.
While it’s amusing, the reality is that the warning sign visible in the photo below certainly won’t be visible in the dark or in a smoke-filled room.
Really!?
The emergency light, which was still wired into the mains system, would do what it is supposed to do and provide sufficient light to direct people out of the building. Or in this case into a cupboard where they might become disoriented and waste valuable time trying to find a safe way out of a dangerous situation.
Aside from being dangerous, this is actually a breach of the Regulatory Reform (Fire Safety) Order 2005 and the company risks potential prosecution from the fire and rescue service if it doesn’t ensure the safety of its occupants. Alternative escape provisions with appropriate signage and lighting were introduced shortly after this photograph was taken.
Further information
Approved Document Part B: Fire Safety - England
Approved Document Part B - Fire Safety - Wales
Please Note: Every care was taken to ensure the information was correct at the time of publication. Any written guidance provided does not replace the user’s professional judgement. It is the responsibility of the dutyholder or person carrying out the work to ensure compliance with relevant building regulations or applicable technical standards.
This article was reviewed and updated on 10 August 2023
Sign up to the building bulletin newsletter
Over 48,000 construction professionals have already signed up for the LABC Building Bulletin.
Join them and receive useful tips, practical technical information and industry news by email once every 6 weeks.
Subscribe to the Building Bulletin
Comments
Add new comment